Tag: Importance of Stainless Steel Suppliers

Posted on

Thermal Conductivity in Stainless Steel and Aluminum

Thermal Conductivity In Stainless Steel And Aluminum

How are stainless steel and aluminum different in terms of thermal conductivity?

  1. Aluminum has better thermal conductivity
  2. High and low thermal conductivity are both useful
  3. Industries that benefit from high or low thermal conductivity

 

Stainless steel and aluminum have long been lauded as one of the most useful industrial materials being used today. Many different industries at different levels benefit from their use, thanks to their many wonderful characteristics. Aside from strength, durability, and versatility, aluminum and stainless steel have other attributes that make them truly useful.

One such attribute is thermal conductivity. This is the process by which thermal energy is transferred through matter and is usually measured in watts per kelvin per meter. Lower thermal conductivity means a lower rate of heat transfer while higher thermal conductivity means efficiency in conducting heat.

If you want to know more about the thermal conductivity of stainless steel and aluminum then continue reading because it could prove useful for you and your future industrial endeavors.

 

Aluminum has better thermal conductivity

Metal Texture Background

Right off the bat, the first thing of note between the two industrial materials is that aluminum has ‘better’ thermal conductivity. Important to note here that having high or low thermal conductivity is not inherently good nor bad. Aluminum simply has a relatively higher thermal conductivity. On the other hand, stainless steel has one of the lowest thermal conductivities for metal alloys.

Another metric used to track thermal conductivity is the British thermal unit (BTU), which uses a number to represent the ability of a material to conduct heat. Aluminum has BTU of 118 while steel has 17. Comparing both to another material like copper, which has a BTU of 223, aluminum can still be a better option because it is lighter, cheaper, and easier to work with and manipulate thanks to its low melting point. Aluminum is also the most abundant metal found in the earth’s crust, making it more accessible than other choices.

 

High and low thermal conductivity are both useful

Both high and low thermal conductivity is useful for many different applications. You just have to know which specific metal can get the job done for you. Aluminum conducts heat well and this makes it good for heat exchangers, heat sinks, and even for cooking materials such as pots and pans.

Since stainless steel is poor at conducting heat, it is better for manufacturing products that are exposed to high-temperature and corrosive environments such as automotive and aircrafts parts like engines and airconditioning systems. Using stainless steel can result in better energy efficiency which eventually leads to savings in the long run.

 

Industries that benefit from high or low thermal conductivity

Clean Saucepan On A Gas Stove In Kitchen

There are many specific industries beyond that value a material’s thermal conductivity, regardless if they are high or low. For example, the construction industry is known for using stainless steel for countless structures and their parts. It is good for building facades, foundations, curtain walls, and other architecturally exposed structure designs. The food industry also uses stainless steel to keep production processes stable where heat is involved. This can be seen in ovens and conveyor belts.

As for aluminum, the automotive and aerospace industries are its biggest beneficiaries because many car and airplane parts are made using aluminum. In fact, most air and spacecraft are made primarily using aluminum with the Boeing 737, the best-selling jet commercial airliner, being 80% aluminum. Even in small-scale product manufacturing, aluminum is widely used. It is a crucial component of light-emitting diodes or L.E.D lights, heat exchangers in electronics, and is also used for packaging, the second-biggest consumer of aluminum.

Aluminum is more malleable and elastic than steel. Aluminum can be used to form different shapes

 

Key Takeaway

The concept of thermal conductivity is complex, but knowing how and why they matter to many industries and manufacturing processes can be useful in helping you choose the right kind of metal alloy or material for future endeavors. Both stainless steel and aluminum are great, but it’s their less-popular qualities like their ability to conduct heat at varying levels that can make the difference.

Click here if you want to know more about aluminum and stainless steel because there is certainly more to know about these wonderful metals.

Posted on

3 Reasons Why Choosing the Right Stainless Steel Supplier in Metro Manila is Important

3 Reasons Why Choosing The Right Stainless Steel Supplier In Metro Manila Is Important

Why is going with the right stainless steel supplier so important?

  1. Cost efficiency
  2. Reliability and consistency
  3. Dedicated individuals

 

 

The products and services that a business provides depend on the quality of their suppliers to a certain extent. Having the right supplies for all kinds of projects is crucial for most manufacturing and construction industries. Even when you have all of the latest, state-of-the-art equipment, mediocre materials will ultimately ruin output.

When it comes to stainless steel suppliers in Metro Manila, choosing the right one is all the more important. In most cases, they will dictate just how successful a job will go. It will have an effect on both the short- and long-term. Finding the right aluminum supplier will mean the difference between efficient work and defective results.

However, even with this common knowledge, there are still contractors that choose to just partner with the cheapest supplier they can find, oftentimes unknowingly sacrificing a lot of their potential as a result. With that in mind, it is important to remember that whatever the case, you should always aim for quality—that is why you should aim to get the right stainless steel supplier whenever you can. listed below are a few other reasons why should do just that!

 

 

Cost Efficiency Through High Quality Products

Cost-Efficiency Through High-Quality Products

The right stainless steel supplier will not always offer the cheapest materials, but they will explain it in a way that you understand quality and pricing ratios. They would have different offers for you depending on your budget and your needs. Take note that contractors would almost always go for the cheapest option. Before you consider that, you should see that even if the material is relatively cheap, they will still provide the best quality materials that they could.

At the end of the day, in recent times, nothing is cheap anymore. Everything has its price—some even marked up too much by the sellers. But in the case of stainless steel providers, the right one will neither give you the cheapest or the most expensive materials. They will play around your budget and suggest to you the best option you have. They will give you the most cost-efficient solution to your project!

 

 

Reliability and Consistency

One of the first signs that a supplier of any sort is reliability. Reliability in the services they provide, the way they work, and their stand as a business partner. Technically speaking, a supplier’s job is to simply supply the materials that are needed by their contractors. They do the manufacturing and sometimes even the optimization of the materials for the job—but in most cases, that’s all they bring.

If you find a stainless steel supplier that goes beyond simply “supplying” then they’re already a cut above the rest. Aluminum suppliers that provide delivery services make it easier for you as a contractor. Sometimes, there are also suppliers that don’t wait for your instructions. They’re the ones that have initiative and will instigate communication between you so that they’ll be able to provide the best products and service that they have.

Another important thing to note is that even with their reliability if they aren’t consistent with their work ethic, you might as well stop the partnership there. There are some businesses that do their best in enticing their clients with how good they’re working together at first. Once they get their trust, this reliable work ethic would sometimes disappear due to complacency. The right supplier will never fall victim to complacency, rather, they will continuously put in the effort to please their clients—focusing on long-term partnership instead of short projects.

 

 

Filled With Dedicated Individuals

Filled with Dedicated Individuals

In a world where automation is slowly taking over the customer service, sales, and marketing teams of businesses, dedicated individuals are all the rarer. A business that values nurturing talented and passionate people that would do everything in their power to give the best service that they can to their clients is definitely trustworthy.

Though not always possible you can try and check the credentials of a company’s team members—check out whether or not they’re qualifications pass your expectations. But you shouldn’t only take note of their credentials. Another thing you can look for is a friendly, yet straightforward approach by their team. The people that you talk to should be able to handle a serious conversation and satisfy all of your questions. In that regard, you should also take into consideration how knowledgeable they are in their field. A team that is not only knowledgeable but passionate in what they do—in this case supplying stainless steel to contractors—is already head-over-heels a great choice for you!

 

 

Key Takeaway

The number of stainless steel suppliers in Metro Manila can’t be counted. But those that give quality services and materials can be. With that being said, you should never settle for the cheapest and most convenient choice you have for stainless steel. Rather, you should look for the ones that will bring you these three things: cost-efficient, quality materials, reliability and consistency in their products and services, and talented individuals.